Info about OARS
Oars:
The oars we use are 7.5ft long, w/ spoon blades. Here are sources to look at:
Grapeview Point Seattle Shaw & Tenny E. Coast
Fisheries Seattle Barkley Sound BC
Doryman article 2PC oar discussion
Concept 2 (Vermont) Croker Oars (AU & USA) The Macon blade
Angus oars and kits (need to reduce to 7.5ft)
NRS Oars, shafts and blades USED OARS from ROWABLE CLASSICS
© PT Watercraft
PT Watercraft offers kits for new and unique boat designs that are efficient, functional, modern & attractive.
Our focus is on creating boats that answer the needs of serious cruisers, weekend camp cruisers and environmentally conscious boaters, sail and motor. Featuring: the fuel efficient 18.5ft center console , PT Skiff, Russell Brown’s modern performance nesting dinghy series, carbon marine hardware, water tight hatch kits, hatch toggles or ‘turn dogs’, adjustable wind shields, dinghy rigs, sails, dinghy foil kits, original PTW stainless steel connective hardware, stitch & glue and epoxy instructional books, etc...
R&D by Russell J. Brown with various design collaborations with Paul Bieker and Eric Jolley of Bieker Boats, Jim Franken of Franken Design, Brandon Davis of Turn Point Design, Paul Zeusche of Townsend Bay Marine, Sean Rankins of NW Sails. Special thanks to our honorary consultants, John Marples, Dick Newick, Jim Brown, Brian Clark, Tom George, Sandy Goodall, John Harris, Alex Spear, Tim Nolan, Meade Gougeon, Ted Pike, Chris Grace. Wood for our kits comes from Edensaw in Port Townsend, WA. Our preferred epoxy is WEST SYTEM from Gougeon Brothers. Publicity thanks to Wooden Boat, Professional Boat Builder, Small Craft Advisor, Epoxy Works, and our customers!..+
< PTW Home > < Media> <Chalk Board> < ABOUT US >
A series of personal oars. 7.5ft carbon spoon blades. The set on the right is the result of our attempt to create a kit. The results were great but not a practical production for us.
Testing shaft flexibility. Checking oar height.
oars built circa 1988 still in use 2016
Can’t find a page?
Try the compass.
PT11 primary links: Description - Kits info - Options info - Nesting info - Builder Center
PT11 primary links: Description - Kits info - Options info - Nesting info - Builder Center
Economy oars, 7ft, unfinished, straight blade oars.
Oars need collars (or stops) to keep the oarlocks from sliding off the oars. Hopefully your oars came with collars that work with the large Gaco oarlocks and are adjustable.
The collars should be adjusted to fit the boat, so that when rowing the oar handles almost touch each other on the centerline of the boat.
The collars should be adjusted to fit the forward oarlocks because they are closer together. Measuring from the outboard edge of the collars to the inboard tip of the oar handle, 22 1/4” should work fine.
The collars shown were made from contact cementing a long length of 3/4” webbing around (and around) the oar.
This is not the easiest thing to do and hopefully you have oars with collars that work well. The diameter of the collars shown is not large enough, as the collars can get wedged in the oarlock, restricting rotation.
See our blog post here:http://ptwatercraft.com/blog/?p=2297